This hub will really strengthen your 36" wheel. The hub is 28mm (1 inch) wider than a standard hub. The flanges are pitched at 100mm and the bearing spacing is at 5 inches (128mm). The spoke holes are big enough to fit the new 14 gauge spokes but can be drilled out to fit the old 12 gauge spokes.
Built using the same technology that has made the now famous Super strong Unicycle.com CrMO Wide flange hub. Now with standard 40mm bearings.
Comes with spacers, bearings and a pair of high tensile bolts.
Hub flange width (W) = 98.5mm
Hub flange Diameter (D) = 56mm
Hub hole Diameter (S) = 2.6mm
Information on the spoke length for building a wheel can be found on our Spoke
Number of Spokes
You may also be interested in the following product(s)