Mad4One 'Aluminium' ISIS Hub - 36 Hole (100mm)

The hub has a pair of ultra tiny flanges and is machined from one single piece of Ergal. This new design allows to keep the durability and strength that a professional hub needs.

No of spoke holes 36
Spoke hole size 2.9mm for 14g spokes
Colour Silver
Material Hardened 'Ergal' Aluminum
Bearings 224212-RS
Type ISIS
Bearing pitch 100mm
Bolt thread size M8

Note: the bearings are not fitted to the hub when supplied and they must be fitted after the wheel is built. Should you need to remove the spokes after the wheel is built you will have to remove the bearings first.

The hub is supplied with a 36 month warranty against manufacturing defects. This hub is not suitable for jumping or heavy use, if used in this way the warranty will be invalid

Hub flange width (W) = 68mm
Hub flange Diameter (D) = 30mm
Hub hole Diameter (S) = 2.8mm

Information on the spoke length for building a wheel can be found on our Spoke
Calculator